Mortuary Equipment

Product Details:

We offer a wide range of Stainless Steel Embalming Table highly appreciated in the national as well as international market owning to their properties such as durability, corrosion resistance, perfect table and longer service life. We fabricate these products using finest quality materials based on latest technology in accordance with the quality standards and norms. These products clients can avail from us at a reasonable price.

Embalming Table

Model No: - SS906

Technical detail

• · Strong nonmagnetic stainless steel material frame work.
• · Top is made with stainless steel sheet, with a high boarder.
• · Provision of Drainage hole, connected to a waste pipe.
• · Bottom of the table covered with SS tube rail.
• · Mounted on 125 mm swivel castors, two with breaks.

Additional Information:

Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Port of Dispatch: Ambala

Production Capacity: 100 unit per month

Delivery Time: 20 days

Packaging Details: export packing

Product Details:

Mortuary chamber (Dead Body chamber)The Mortuary Chamber offered by us is noted for its double walled construction where outer wall is made up of thick mild steel sheet while inner wall is built using stainless steel sheet. To maintain the temperature insulation, the gap between the outer and inner wall is filled with glass wool. The front opening is intact and is covered with doubled walled floor using magnetic gasket, handle and lock & key. Both the upper and the lower chamber are fitted with rollers to ensure hassle-free movement.

On the rear top of the chamber there is a refrigerator that maintain the temperature between ±2°C and 4° C owing to the support of hermetically sealed compressor. It is controlled using an automatic electronic digital temperature controller-cum indicator. Moreover, the panel of the chamber comes with indicators and controllers. The whole set up is complete with rod and on a single phase, the plug and the unit is able to work on 220V AC 50 Hz.

Price range: Rs 65,000 to Rs 4,20,000

Additional Information:

Item Code: MC09

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: India

Production Capacity: 100 pc Per month

Delivery Time: 30 days

Packaging Details: packed in heavy duty wooden boxes

Product Details:

Postmortem Table

• · Strong SS Tubular Frae work Made SS 202 material.
• · Top made from thick SS sheet, with high boarder.
• · Inbuilt stainless steel sink, connected waste water tube.
• · Provision of hot and cold water shower Tap.
• · Four stainless steel Body Support flat accessories.
• · Over all size: - 285(L) x 90(W) x 85(H) Cm.

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: India

Production Capacity: 50

Delivery Time: 15 Days

Product Details:

Dissection Table

• Frame work constructed with stainless steel material.
• Top is constructed with stainless steel sheet, with high boarder.
• Provision for drainer hole with tube for waste liquid.
• Provision for Keeping SS bucket under the Top surface.
• Over all size: - 72”(L) x 24”(W) x 90(H) mm.
• Mounted on 125 mm swivel castors, two equipped with breaks.
• Supplied in knock down position, with assembly Kit.

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: india

Production Capacity: 100 unit per month

Delivery Time: 20 days

Packaging Details: standard Packing

Product Details:

Our company is proud to offer a range of high quality Dissecting Table to the customers. In order to meet the industry set standards, we ensure that the stainless steel used for the production process is sourced from the renowned vendors of the market. Sturdy in built, the product is manufactured using high-tech machines, that ensures these are in line with the industry set standards. Owing to the quality of the products offered by us, we have been able to make our mark in overseas as well.

Technical Description

• Frame work of Dissecting Table constructed with stainless steel material
• Top is made of the Dissecting Table made from stainless steel sheet, with high boarder
• Mounted on 125 mm swivel castors, two with breaks
• Provision for drainer hole with tube for waste liquid
• Over all size: - 1850(L) x 600(W) x 900(H) mm

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: Delhi

Production Capacity: 100 pcs per month

Delivery Time: 30 days

Packaging Details: Packed in heavy duty Wooden Box

Bio Medical Waste Bin

• Strong Stainless steel tubular frame work.
• Provision of Pedal operated Colour Bins.
• Bins are removable.
• Mounted on 100 mm castors, 2 with Breaks.

Product Details:

• Mortuary Cabinet Designed to store Dead bodies under cool conditions to prevent decomposition.
• These Mortuary Cabinet has Double walled construction outer in SS 202 grade & Inner Made in SS sheet of 304 grade.
• Mortuary Cabinet ‘s The gap between the two is filled with PU Puff for temperature insulation.
• Mortuary Cabinet Supplied with SS Made removable Stretcher.
• Mortuary Cabinet’s Front Opening covered with double walled door with magnetic gasket, lock & key and handle.
• These Mortuary Cabinet has a Provision of LED Light inside the chamber & MCB, Fuse and Load facility in control panel.
• Our Mortuary Cabinet has Micro- processor based temperature controller cum indicator uoto -5 Deg C.
• An energy efficient cooling unit is installed in our mortuary chambers. We use ISI marked high end CFC
• We use Free compressors of Tecumseh make in these Mortuary Cabinet, conforming to latest international standards.
• Mounted on Heavy Duty Rubber wheels.
• Mortuary Cabinet is to work on 220V AC 50 Hz single phase, complete with cord and plug.

Available Capacity

• Single Body Mortuary Cabinet.
• Two Body Mortuary Cabinet.
• Three Body Mortuary Cabinet.
• Four Body Mortuary Cabinet
• Six Body Mortuary Cabinet.
• Nine Body Mortuary Cabinet

• Material : SS
• Power:850
• Voltage:220/50
• Power source:electric
• Applications:Blood Plasma,vaccine,biological

Morgue Chamber, Morgue freezer, Morgue refrigerator, Morgue equipment, Mortuary equipment, Mortuary cabinet ,Mortuary chamber, mortuary freeze, mortuary refrigerator, Dead body Storage Chamber, Dead Body Cabinet, Dead Body Freezer, dead body Refrigrator

Price range: Rs 65000 to Rs 4,20,000

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P

Port of Dispatch: india

Production Capacity: 10 unit per month

Delivery Time: 20 days

Packaging Details: Standard Packing

Dead body Transfer Table

Technical Description:

• Dead Body Table Constructed with stainless steel material.
• Top of the Dead Body Table made with stainless steel sheet, with high boarder.
• A shelve is provided under the top.
• Dead Body Table Mounted on 125 mm swivel castors, two with breaks.
• Provision for drainer hole connected with tube for waste liquid and keeping the SS Bucket under the Top Surface of Dead Body Table.
• Over all size: - 2400(L) x 800(W) x 850(H) mm.

Additional Information:

Minimum Order Quantity: 2 Pieces

Port of Dispatch: Delhi

Production Capacity: 100 pcs per month

Delivery Time: 30 days

Packaging Details: Nicely packed in Heavy wooden Boxes

Product Specification

Mortuary Transfer Table

· Frame work constructed with stainless steel material.

· Top is made with stainless steel sheet, with high boarder.

· A shelve is provided under the top.

· Mounted on 125 mm swivel castors, two with breaks.

· Over all size: - 187(L) x 60(W) x 90(H) mm.

Product Details:

• Strong mild steel tubular frame work.
• Remote controlled Height Adjustment.
• 5 Stainless Steel ball bearing Rollers.
• Mounted on 125mm swivel Castors, two with breaks.
• Size: - 90”L x 29”W x 16”/66”H(adjustable).
• Max. load: 150kg.
• Equipped with battery backup.
• Pre treated and epoxy enamel painted finishing.

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: india

Production Capacity: 100 unit per month

Delivery Time: 20 days

Product Specification

Small Dissecting Table

· Strong Stainless Steel tubular Frame Work.

· Top is covered with SS Sheet, with Centre Slope In cross Form.

· Provision of Drainage Hole connected with Waste water outlet Pipe.

· Provision of SS Bucket and Sliding Tray.

· Mounted on Rubber Stumps.

· Size: - 48”L x 24”W x 36” H.

Other Information

· Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer), Western Union

· Port of Dispatch: Delhi

· Production Capacity: 100 pcs per month

· Delivery Time: 30 days

· Packaging Details: packed in heavy duty wooden box

Product Details:

Technical Description:

• Frame work of Dissection Table constructed with stainless steel material.
• Top of Dissection table made with stainless steel sheet, with high boarder and little slope.
• Provision of instrument Drawers under the Top surface.
• Supplied with hand supporting accessories.
• Mounted on 100 mm swivel castors, two with breaks.
• Provision for drainer hole in the middle of the top.
• Hole connected with Waste liquid tube, connected to the SS bucket.
• Over all size: - 2400(L) x 800(W) x 850(H) mm.

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: Delhi

Production Capacity: 100 pcs per month

Delivery Time: 30 days

Packaging Details: packed in heavy duty Wooden Boxes

Product Details:

Product Specification

Stainless Steel Embalming Table

· Strong non magnetic stainless steel material frame work.

· Top is made with stainless steel sheet, with high boarder.

· A drainage hole located at the end side of the foot, with SS Bucket.

· Mounted on 125 mm swivel castors, two with breaks.

· Over all size: - 74(L) x 24(W) x 36”(H).

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P

Port of Dispatch: ambala

Production Capacity: 100

Delivery Time: 15

Packaging Details: export packing

Product Details:

Technical Description of the Product:

• Frame work of Postmortem Table constructed with Strong stainless steel 202 grade of SS material.
• Top is constructed of postmortem table made with stainless steel sheet, with high boarder.
• Provided with a built stainless steel sink, connected waste water tube.
• Provision of hot and cold water shower Tap.
• A electricity board connection attached with postmortem table for On/Off geezer and other operation.
• Four stainless steel flat accessories for performing different action such as neck, shoulder, legs cutting etc.

Dimensions

• Over all size of postmortem table: - 2500(L) x 800(W) x 850(H) mm.

Finishing

• Stainless Steel Mirror Buffer finishing.

Packing Detail

• Table packed in heavy duty wooden boxes, after folding the table.

Other features

• Easy to moveable.
• A ISO certified product.
• Legs section of the table is making in folding position.
• Easy and fast assembly.
• Tool kit for assembling the stand.

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: Delhi

Production Capacity: 100 pcs per month

Delivery Time: 30 days

Packaging Details: Packed In Heavy duty Wooden Boxes

Product Details:

Mortuary Scissor Lift Trolley

• Pre treated and epoxy enamel painted finishing.
• Strong mild steel tubular frame work.
• Height adjustment done by remote.
• Stainless steel ball bearing Rollers.
• Trolley mounted on 125mm swivel Castors, two with breaks.
• Size: - 90”L x 29”W x 16”/66”H(adjustable).
• Max. load: 150kg.
• Equipped with battery backup.

Additional Information:

Port of Dispatch: india

Production Capacity: 100 unit per month

Delivery Time: 20 days

Packaging Details: standard packing

Product Details:

The Autopsy Table offered by us are used in different hospitals and medical equipment. Constructed using stainless steel material, the Autopsy Table we offer are not only used domestically but are exported as well. In order to maintain the standards, the stainless steel that is used for the production process is procured from the trusted vendors of the market. Before the final dispatch, each product is minutely inspected by our quality checkers and only selected products are dispatched to the customers.

Description:

• Frame work constructed with stainless steel material
• Top is constructed with stainless steel sheet using high boarder
• Mounted on heavy duty PCV rubber stumps
• Provision for drainer hole with tube for waste liquid
• Provision for water tap connected with sink
• Over all size: 2000(L) x 800(W) x 850(H) mm
• Optional table can be provided wheels

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: Delhi

Production Capacity: 100 pcs per month

Delivery Time: 30 days

Product Specification

Animal Post mortem Table

· Strong Stainless Steel Tubular Frame work.

· Top of Table is constructed with 16 Swage Stainless Steel sheet of 304 Grade.

· High board for prevent drainage of fluids.

· Provision of Drainage Hole, connecting with SS bucket.

· Mounted On 150mm swivel castors, two equipped with breaks.

· Remote controlled Adjustable Height with electric Actuators.

· Size: - 84”L x 48”W x 30”/42”H.

· Load bearing capacity up to 700 Kgs.

Product Details:

Autopsy Dissection Table

Post Mortem Table

Specification

• Frame work constructed with stainless steel material.
• Top is made with stainless steel sheet, with high boarder.
• Mounted on 100 mm swivel castors, two with breaks.
• A shelve is provided under the top.
• Provision for drainer hole with tube for waste liquid.
• Optional table can be provided without wheels.
• Over all size: - 2000(L) x 800(W) x 850(H) mm.

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Port of Dispatch: india

Production Capacity: 100 unit per month

Delivery Time: 20 days

Folding Autopsy Table

Postmortem Table

Specification

·Frame work constructed with stainless steel material.

·Top is constructed with stainless steel sheet, with high boarder.

·Provision for drainer hole with tube for waste liquid.

·Optional table can be provided without wheels.

·Over all size: - 2000(L) x 800(W) x 850(H) mm.

Folding Postmortem Table

· Frame work constructed with stainless steel material.

· Top is constructed with stainless steel sheet, with high boarder.

· Provision for drainer hole with tube for waste liquid.

· Over all size: - 2000(L) x 800(W) x 850(H) mm.

· Optional table can be provided with wheels