Standard Steel

Vertical Autoclave double drum

 

A versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. Loss to a minimal level.The outer chamber is made out of thick mild steel. The lid is made of  thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a  joint less neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided.  A double safety valve has also been  provided along with inlet.  Supplied complete but without dressing bins.

 

Optional (extra cost):-

• Automatic low-water level cut off- device
• Pressure Control switch
• Water lever arrangement
• Radial lock
• Digital Temp indicator

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Western Union
• Port of Dispatch: India
• Production Capacity: 100 pc Per month
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty wooden boxes

Portable Non Electric Autoclave

This is suitable for general laboratory & field sterilization of instruments & dressing etc. Lid is provided with dial pressure gauge, two safety valve & steam release valve. Body is made of Aluminum with no joints.

Vertical portable aluminum. Autoclave with seamless construction to avoid any accumulation of dust or bacteria residue. Autoclave has twin safety system to ensure safety of operator and patients, Pressure cooker type lid opening to avoid any leakage.

 

Silent features

• Strong Seamless thick Aluminum sheet construction for better safety and Durablility.
• syntactic Rubber Gasket for long term performance.
• equipped with color coded pressure gauge.
• Double heavy duty steam release pressure safety valve for safety purpose.
• heavy duty handles.
• Operating Pressure 15-18 psi
• Total Sterilization 20-30 minutes
• Available sizes
  • 300 x 350 mm or 25 liter.
  • 300X500 MM or 35 liter.
  • 350 x 450 mm or 45 liter.
  • 450 x 375 mm or 60 liter
  • 450 x 450 mm or 80 lite

Additional Information:

• Item Code: NA01
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ambala
• Production Capacity: 200 per month
• Delivery Time: 30 days
• Packaging Details: export packing in card board boxes

• Triple Wall High Pressure Vertical Autoclave

   

  • Construction: - Triple walled construction, all the three walls are made of thick high grade stainless steel sheet of SS-304 grade. The lid is made of stainless steel sheet. The unit is fitted with radial locking system with paddle lifting device, made of MS chrome plated. Provided with built- in safety valve, pressure gauge, pressure release valve and water level indicator. The pressure is adjustable from 5 psi to 20 psi with automatic pressure control switch, which controls the pressure with an accuracy of +/- 1 psi. Supplied complete with stainless steel basket, chord and plug.
  • Mode of Heating: - Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 220 volts single phase 50 cycles.
  • Working Pressure: - The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g ( 15 psi - 17 psi).
  • Working Temperature : 121° C .
  • Hydrotest Pressure : 2.5 kgf/cm sq.g ( 35 psi).

   

  Model No	Chamber size	Capacity
  VA101	250 x 450 mm	22 litre
  VA102	300 x 500mm	40 litre
  VA103	350 x 550mm	50 litre
  VA104	400 x 600mm	78 litre
  VA105	450 x 600mm	98 litre
  VA106	550 x 750mm	152 litre

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P
• Port of Dispatch: india
• Production Capacity: 10
• Delivery Time: 15 days
• Packaging Details: wooden crate packing

Stainless Steel Lab equipment Trolley

• Strong Stainless Steel tubular frame work,
• Three Stainless steel shelves.
• 75 mm deep SS Shelve.
• Load bearing capacity of each shelf is 30 kg
• Mounted on 4 x 125 castors, 2 with breaks.
• Size: - 75L x 45W x 82H cm.

Additional Information:

• Item Code: LT01
• Production Capacity: 500 per month
• Delivery Time: 10 days
• Packaging Details: packed in heavy duty card board boxes

Blood Cell Counter

• counts(BASO, EOSIN, MONO, LYMPH, JUVEN, STAB, SEG, MYELO).
• Two/Five/Eight Keys and one totalizer.
• Figure range for each window (including the totalizer) is from 0 - 999.
• ABS outer shell can resist collision.
• At one hundred increment of the total record, the bell sound be heard.
• Rest knob can easily clear all figures.
• available in 2, 5 and 8 keys.
• packed in laminated card board box, duly covered with Thick Foam.

Additional Information:

• Item Code: BBE258
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Production Capacity: INDIA
• Delivery Time: 10 DAYS
• Packaging Details: Export packing

Soxhlet Extraction Apparatus

 

• Ideal choice for nitrongen extraction and distillation experminets.
• Compact design.
• Effective heat distribution by glass fiber yarn attached to the heating cords.
• Individual temperature control.
• Suitable for heating soxhlet flask of 100-1000 ml.
• Complete set with clamp holder and soxhlet flasks.
• Heating temperature range : Upto 350 Deg.
• Heating out put : 180-1800W.
• Exterior Body : Duly coated MS sheet.
• Spare Mantle : Glass Fibre yarn.
• Heating Element : Kanthal Wire.
• Temperature control : Energy Regulator
• Voltage Supply : 220-230V/110V.
• Frequency : 50Hz.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit)
• Port of Dispatch: india
• Production Capacity: 500 pcs
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty card board Boxes

Plant Growth Chamber

It has outer wall made of M.S. Sheet duly painted and inner wall made up of heavy gauge aluminum or S.S. Sheet filled with high grade glass wool to avoid g\thermal loss. Besides outer double walled door, A full view inner glass door allows inspection of test samples without disturbing the inner chamber Conditions. Unit is sup-plied with three adjustable preformatted shelves. Temperature range from 5°C to 50°C+ 1°C is controlled by DUAL SETTING Digital Temperature Indicator-cum-Controller so as to set two Different temperatures for Day and Night. Exterior illumination with fluorescent tubes fitted on both sides of the chamber accounts for orificial day light, and the cyclic illumination conditions are regulated by Automatic 0-24 hrs. Timer. When all the tubes are ON temperature form 15°C to 50°C +1°C can be Obtained. Humidity from ambient to 95% +3% RH is con-trolled by a controller at temperature ranging From ambient to 50°C and the same is achieved by means of injecting steam. Arrangements for increasing The humidity is provided and not for decreasing.

W x H x D Capacity Aluminium S.STEEL

 

• 505 x 830 x 415 m.m. 6cuft
• 570 x 875 x 550 m.m. 10cuft
• 650 x 900 x 550 m.m. 12cuft

Additional Information:

• Item Code: SS2011
• Production Capacity: 10
• Delivery Time: 15
• Packaging Details: WOODEN CRTE

Biological Safety Cabinet

 

The cabinets are fabricated out of thick board duly sunmica clad. Interior surfaces are epoxy painted for its longer life. The work table is made of heavy gauge S.S. sheet and is fitted with U.V. Germicidal Light, static pressure Manometer, Exhaust System 9suitable for 6 feet duct) and Virus Burn Out Unit. Side panels are made out of thick transparent plexi glass duly framed. The unit is fitted with pre-fillter and HEPA Filter. Air is drawn through pre-filter and is made to pass through highly effective GEPA (High Deficiency Particular Air) ilters having efficiency retaining all airwomen particles of size 0.3 micron and larger. Using a dynamic balancing machine, the blower and motor assembly is statically and dynamically balance. Motor of 1/4 H.P. capacity operates with minimum noise level. The working are is illuminated by fluorescent lighting fitted to the unit. The height of the working table provides a comfortable “SIT DOWN” working position for the operator. In addition to the above features of a standard Vertical Laminar Flow Bemch, the Bio-safe cabiets have arrange ments for re-circulating a part of the air thus creating highest level of clean air, The unit is also convertible to the conventional vertical flow Bench with downward air flow by lifting the sliding front door upwards. Air is sucked through the pre-filter and the excess air is thrown out from the top, through a GEPA filter of size 1’x 1’x 6”. Supplied with glove ports and gauntlets, HEPA filter, pre-filter, U.V. light and fluorescent light .

 

 

Optional Accessories

• Exhaust Ducting (per running feet)
• Gas Burner

Additional Information:

• Item Code: SS2033
• Pay Mode Terms: T/T (Bank Transfer),D/P
• Port of Dispatch: ambala
• Production Capacity: 100
• Delivery Time: 15 days
• Packaging Details: export packing

Laborator Hot Plate 

Technical Description:

• Body made of MS sheet duly stove painted.
• Heavy duty cast iron top for operating at high temperatures.
• Fibre blanket insulated with kanthal heater and fire proof connection.
• Fitted with energy regulator and thermostatic controller.
• Available in multiple sizes and shapes.

 

Technical Specification:

 

Available Models:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Western Union
• Port of Dispatch: India
• Production Capacity: 100 pc Per month
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty card board boxes

 Rotary Flask Shake

• Ideal for mixing and development of cultures, chemicals, solvents and assays etc.
• Base assembly fabricated from heavy mild steel sections.
• Compact counter balanced drive mechanism ensures high stability and reliability.
• Universal platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks.
• Available in digital control of RPM and timer.
• Interchangeable adaptors.
• Technical Specification:
• Type of movement: - Rotational
• Speed range: -0 – 350 RPM.
• Operation mode: -Continuous operation
• Timer option: -Yes
• Dimension: -74 x 74 x 20 mm.
• Weight: -15 kgs
• Platform size: -18” x 18”; 24” x 24”
• Permissible ambient temperature: -5 – 40 deg.
• Permissible relative moisture: -80%
• Motor load: -PDMC motor
• Maximum load: -12 kgs
• Voltage: -220 – 240V
• Supply: - 220 V, 50Hz

Available Models:

 

Additional Information:

• Item Code: rs02
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Western Union
• Port of Dispatch: India
• Production Capacity: 100 pc Per month
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty card board boxes

VDRL Shaker

• Compact shaker for mixing blood samples.
• Wide speed range.
• Timer options for accurate mixing time.
• Stable at high speeds.
• Separate platform attachment available for mixing more than one samples.

 

Technical Data

 

Additional Information:

• Port of Dispatch: India
• Production Capacity: 100 pc Per month
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty wooden boxes

VDRL Shaker

• Compact shaker for mixing blood samples.
• Wide speed range.
• Timer options for accurate mixing time.
• Stable at high speeds.
• Separate platform attachment available for mixing more than one samples.

 

Technical Data

 

 

Additional Information:

• Production Capacity: 1000 pcs per month
• Delivery Time: 15 days
• Packaging Details: standard packing

Horizontal Laminar Air flow  

 

• Working table of s.s.304, HEPA of 0.3u of an effceiency of 99.97% down to 0.3 micron.
• Media is of glass fiber & made of pleats back & fro in an anodized aluminum frame (with test report) pre filter of dry fiber washable type with the frame of on all the sides confirm the international standards 209 E.
• statically balanced motor  blower assembly (heavy duty) Velocity at all output of HEPA is 90+-20 FPM noise level is very low, vibration is also very low.
• Normal working fluorescent light static pressure manometer U.V. light.
• The body is made of laminated board duly satin finished wherever necessary/M.S. duly powder coated/S.S. body.
• Front & side Door of acrylic sheet(transparent), Gas cock.

 

Working size:-

 

 

Additional Information:

• Item Code: SS2016
• Production Capacity: 100 pcs per month
• Delivery Time: 15
• Packaging Details: EXPORT PACKING

Seed Germinator

 

With digital temr controller Most suitable for conducting various experiments on a variety of seeds under different conditions of Tempera turret and humidity. Atmospheric conditions are created within the chamber to perform different experiments without going onto the field. The double walled unit has inner chamber made up of anodized Aluminum or S.S. And outer chamber of M.S. Sheet duly painted. Temperature from 5°C to 50°C + 1°C is Controlled by Digital temer indicator -cum-controller. Humidity (NOT ADJUSTABLOE) is created in a S.S. Water reservoir fitted at the bottom to provide 90% to 95% + 3% RH Humidity. Supplied complete With 14 adjustable perforated trays. Complete with cord and plug to work on 220/230 V A.C. Supply.

 

Inside Chamber Size Aluminum S.S.(304 Grade)

Size 555m.m. (W) X 910 m.m. (H) X 605

Additional Information:

• Item Code: SS2005
• Production Capacity: 100
• Delivery Time: 30 days
• Packaging Details: EXPORT PACKING

 Serological Water Baths

• These units are double walled with inner chamber made up S.S. sheet and outside of M.S. duly enamel painted.
• The gap between the walls is filled with special grenade glass wool in order to avoid thermal losses.
• A drain plug is also fitted to the unit. The inner chamber fitted with immersion type heating element is covered with perforated removable diffuser tray.
• The cover is provided with the unit as standard accessory.
• Temperature from ambient to 100° C is controlled BY hydraulic capillary type thermostat with an accuracy of + 0.5°C Supplied complete with 220/230 volts A.C. supply

 

Available Models

Model No   Product Description

S.S.101       Serological Water bath 300 x 175 x 175mm

S.S.102       Serological Water bath 300 x 250 x 175mm

S.S.103       Serological Water bath 375 x 300 x 175mm

S.S.104       Serological Water bath 450 x 300 x 175mm

S.S.105       Serological Water bath 600 x 300 x 175mm

Additional Information:

• Item Code: SS2037
• Production Capacity: 100 pcs per month
• Delivery Time: 15 days
• Packaging Details: EXPORT PACKING

Water Bath Incubator Shaker 

· Double walled unit with inside made of thick S.S. sheet and outer of M.S. sheet duly enamel painted paramedical lid made of S.S. prevents falling of condensed water droplets on the specimens. 

· Heating is achieved through a immersion type heater and the temperature is controlled by hydraulic type thermostat with an accuracy of + 0.5°. 

· The bath has an oscillating tray riding on bass rollers oscillated through a geared variable speed motor . 

· Shaking speed range is between 40 to 140 cycles per minute. 

· The shaking tray can either hold test trubes or Erlenmeyer flasks of 25mlk or 50ml or 100ml or 250ml or 500ml or 1000ml as ordered by the users. (Kindly maintain the capacity of the flasks while ordering). 

· Supplied complete with one shaking tray, paramedical cover, L shaped thermometer cord and plug, to work on 220/230 volts A.C. supply. 

· Available with heating arrangement only (haiving temperature range from ambient to 100°C) or with both heating and cooling arrangements (having temperature range from 5° to 100°C).

 

Shaking Tray Size

· 275 x 275 x 150mm, 12 liter.

· 405 x 300 x 150mm, 18 Liter.

Additional Information:

• Item Code: SS2039
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: India
• Production Capacity: 100
• Delivery Time: 15 days
• Packaging Details: export packing

 

Orbital Shaking Incubator

The outer chamber is made up of M.S. Sheet duly painted and inner chamber of thick S.S. Sheet. The Gap between two walls is fitted with high grade glass wool to avoid thermal loss. The plexi glass window makes possible to inspect the specimen without disturbing the inner temperature. The lid of chest type unit is fitted with fluorescent tubes of 60 cms, Length, on the inner side. The unit has a temperature range From 5°C. When the tube lights are ON temperature range is from 10°C to 50°C Sir circulation fan is fitted maintain temperature uniformity throughout. Cyclic illumination conditions are controlled by an automatic Timer (0-24) fitted to the unit. It is fitted with DIGITAL SPEED METER (RPM COUNTER) for shaking Platform having VARIABLE SPEED. The shaker has variable speed and a platform containing 16 flasks of 500ml or 40 flasks of 100 ml or 34 flasks of 150 MI capacity is supplied with the unit as standard Accessory. To work on 220/ 230 volts A.C. Supply. (a) Temp. Range from 5°C above ambient to 50°C (b) Temp. Range from 5°C.

Optional Accessories

• Spare Shaking Platform.
• Additional non-shaking tray (Made of S.S.)
• Built-in U.V. Germicidal tube light (Price for 2 nos.)
• Automatic Voltage Stabilizer 3.0 KVA (TRIPLE RELAY)

 

Additional Information:

• Production Capacity: 100 pcs per month
• Delivery Time: 15 days
• Packaging Details: standard packing

Laboratory Muffle Furnace 

Light weight with ceramic fiber wool insulation (instead of brick insulation). The outer casting is made of double walled thick p.c.r.c. sheet, duly painted. Heating elements are made of kanthal “a-1” wire and backed by high temp. cerwool insulation, which avoids loss of energy. Temp. control unit consists of energy regulator, fitted in front of furnace with two pilot lamps. The apparatus is cpmplete with one pyrometer, thermocouple, silver thermal fuse, main lead with power plug. To work on 220/230 volts or 400/440 volts A.C. Maximum temp. is 1000oC and working temp. 900oC for model of higher temp. the maximum temp. is 1200oC and working temp. 1100oC

Outer Shell Made Out Of Thick Mild Steel Duly Finished In Attractive Stoving Enamel Paint.

• Fitted With Grooved Refractory For Supporting The Heating Elements Made Out Of Kant Ha Wire And Are Easily Replaceable.
• Maximum Temp 1000 O C Working Temp. 940o C Controlled With Indicators, Pyrometer, Thermocouple-Thermal Fuse Etc. Workable On 220 V Ac 50 Hz Single Phase.

 

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Western Union
• Port of Dispatch: India
• Production Capacity: 100 pc Per month
• Delivery Time: 30 days
• Packaging Details: packed in heavy wooden boxes

Melting Point Apparatus

 

A metallic heating block is provided with holes to receive three capillary tubes and a stem type thermometer. The body is finished in stoving enamel paint. The apparatus can measure melting point upto 350oC. The block is heated by superior heating elements and temp. is controlled by a heating regulator. A shadowless lamp has been provided to illuminate the capillaries and focusable magnifier facilitates in observations. The whole unit is housed in a aluminium cast casing and provided with a control panel. Provided with indicator lamps,heat energy regulator, on-off switch, cord-plug etc. the equipment is to work on 220 V AC 50 Hz single phase. Supplied without thermometer & capillaries.

Additional Information:

• Port of Dispatch: India
• Production Capacity: 500 pc per months
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty boxes

Humidity Enviormental Cabinet

 

Specification 

Humidity Refrigerated provided with refrigeration system to control temperature range from 10°C to 50°C + 2°C and humidity 55% to 95% and fitted with DIGITAL TEMP. INDICATOR -cum- CONTROLLER.

 

Inside Size Of Each Chamber Aluminum S.S.(304 Grade)

 

• 405 m.m.(W) X 710 m.m. (H) X 455m.m. (D)
• 605 m.m. (W) X 605 m.m.(H) X 605 m.m.(D)
• 605m.m. (W) X 910m.m.(H) X 605m.m. (D)

 

 

Optional Accessories

 

• Hygrometer (Dial Type Humidity Indicator)
• Electronic Digital Temp. & Humidity Indicator Cum Controller, To cost extra
• Wet and Dry Thermometer
• Automatic Voltage Stabilizer 3.0 KVA (TRIPLE RELAY)

Additional Information:

• Item Code: SS2008
• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: export packing

Laminar Air Flow

HEPA of 0.3u of an efficiency of 99.97% down to 0.3 micron. Media is of glass fiber & made of pleats back & fro in an anodized aluminum frame (with test report) pre filter of dry fiber washable type with the frame of on all the sides confirm the international standards 209 E. statically balanced motor blower assembly (heavy duty) Velocity at all output of HEPA is 90+-20 FPM noise level is very low, vibration is also very low. Normal working fluorescent light static pressure manometer U.V. light.

The body is made of laminated board duly satin finished wherever necessary/M.S. duly powder coated/S.S. body. Front & side Door of acrylic sheet(transparent), Gas cock.

Working table of s.s.304 (Horizontal/vertical).

Working Size:

Additional Information:

• Port of Dispatch: India
• Production Capacity: 50 pc Per month
• Delivery Time: 10 days
• Packaging Details: packed in heavy duty wooden boxes

Standard Steel BOD Incubator

• Temperature is controlled by a sensitive thermostat from 5o C to 50o C +- 1o C. for lower temperature.
• Double wall construction. Inner chamber made of richly anodized aluminium/stainless steel sheet and Exterior made out of thick mild steel sheet duly finished in white storving enamel paint Supplied with two/three removable perforated shelves.
• A control panel is provided with various indicators, on-off switch, L shaped thermometer. Supplied with cord and plug etc. the equipments is workable on 220 V AC 50 Hz single phase.
• Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without distributing the chamber temperature.
• The gap between wall of equipments are filled with glass wool for temp. Insulation. The cabinet is mounted on castors.
• Working a standard cooling unit with a sealed compressor with protective device has been provided below the chamber for safe and efficient working. Heating arrangement has been made within the chamber for higher temp.
• Working the temp. can be regulated within the range by means of a high precision double action thermo-regulator. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.
• Available Models   

 

 

 

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: India
• Production Capacity: 100
• Delivery Time: 15
• Packaging Details: packing

COD Digester 

Technical Description

• Uniform heating without water circulation
• Solid block heated type
• Auto time control unit & digital temperature controller for better result
• Compact construction and ergonomic design
• Standard APHA method
• Provided with stand and standard accessories

 

Technical Specification:

 

Available Models

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India
• Production Capacity: 100 pc per months
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty cardboard boxes

Thermostatically controlled. Inner chamber made of SS. Supplied with concentric rings.

 

Technical Specification:

 

Optional

• Imported thermostat “EGO/JUMO” German with the accuracy of =-0.5o C.
• Digital temp. indicator – cum – controller Stirrer with 1/20 H.P. high speed motor with stainless steel stirring rod and blade.
• Digital Temp. indicator

Additional Information:

• Port of Dispatch: India
• Production Capacity: 100 pc Per month
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty card board boxes

Technical Description:

• Designed for multi function dry bath heating of test tubes, micro centrifuge tubes and cuvettes.
• Ideal for enzyme reaction, inactivation of sera, incubation and other lab procedures.
• Through choice of black, a wide variety of tubes and vessels can be accommodated in standard unit.
• Supplied complete with block extraction tool.
• Recessed well/cavity accommodates two interchangeable aluminum.

 

Technical Specification:

Additional Information:

• Item Code: DB01
• Port of Dispatch: India
• Production Capacity: 100 pc Per month
• Delivery Time: 30 days
• Packaging Details: EXPORT PACKING

Environmental Cum Humidity Test Chamber

 

Specification

 

Heavy duty robust construction with inner chamber made of stainless steel and outer made of M.S. sheet duly enamel painted Glass window allows inspection of samples with-out disturbing the inner chamber temperature. Four stainless steel adjustable shelves are provided with the unit. Air circulation fan is also fitted to the unit for temperature uniformity Temperature range from 10°C to 60°C + 2°C is controlled by Dual Stetting Digital Temperature Indication-cum controller and humidity is controlled by imported humidistat from ambient to 95% + 3% RH. Arrangement exists only for increasing the humidity and not for decreasing. fitted with exterior illumination achieved by fluorescent tube and 0-24 cy-cilic timer. To work on 220/230 volts AC supply.

 

Inner chamber Size : 1mtr X 1mtr X 1mtr.

Additional Information:

• Item Code: SS2036
• Production Capacity: 100
• Delivery Time: 15
• Packaging Details: wooden crate

Specification

This is a double walled unit mounted horizontal on a sturdy, heavy mild steel tubular Stan duly painted. Fitted with pressure garage, safety valve and steam release valve. Available with or without boiler. For units fitted with S.S. Boiler, separate valve for infecting the steam into the main chamber and releasing the steam tin atmosphere after use are provided. Hydraulically tested up to 40 psi, Automatic vacuum bread is provided to break the vacuum in case of formation of vacuum

due to steam condensation Inner chamber made OD S.S. And outer of Mild Steel duly painted. Fitted with Automatic Pressure Control Switch and Automatic Low Water Level Cut-Off device. Lid is made of S.S. Plate with radial locking system. Without steam jacket.

Dia X Height Load Without Boiler With Boiler Outer Of S.S. Sizes :-

• 250 X 450 m.m. 2.0 KW
• 300 X 500 m.m. 3.0 KW
• 350 X 550 m.m. 4.0 KW
• 400 X 600 m.m. 6.0 KW
• 450 X 600 m.m. 6.0KW
• 550 X 750 m.m. 8.0 KW
• 400 X 1100 m.m. 9.0 KW

Additional Information:

• Item Code: SS2001
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India
• Production Capacity: 100
• Delivery Time: 15
• Packaging Details: export packing

Double walled. Inner chamber made of stainless steel fitted with high immersion heater. Thermostatically controlled temperature with high accuracy.

 

Available Models:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Western Union
• Port of Dispatch: India
• Production Capacity: 100 pc Per month
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty card board boxes

Double wall construction. Inner chamber made of highly polished stainless steel or copper sheet and outer made of mild steel duly finished in stoving enamel. Temperature range 50oC to 250oC + 2oC is controlled by a thermostat. Supplied complete with stirrer, diffuser shelves, cover etc. panel provided with on-off switch, pilot lamps thermostatic control knob etc.

Technical Description:

 

Optional:

• Mercury contact thermometer and relay with accuracy better than 1°C.
• Imported thermostat ‘EGO”/”JUMO’ german with accuracy of 1°C.
• Digital temp. Indicator- Cum- Controller
• Microprocessor PID Digital temp. Indicator- cum- Controller.
• Digital temp. Indicator

Additional Information:

• Port of Dispatch: India
• Production Capacity: 100 pc Per month
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty card board boxes

Laboratory Stirrer

Technical Description:

• Designed for homogenization, emulsification and dispersion and mixing of fluids at high speed.
• AC universal motor with steeples speed regulations for continuous variation of speed as per
• Reliable performance even in continuous use.

 

Technical Specification:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: India
• Production Capacity: 500 pc per months
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty boxes

Hot Air Over

 

These are sturdy double walled units with outer chamber made of M.S. sheet duly enamel painted with inner made up of anodized aluminum or S.S. sheet. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated shelves to convenient height. Temperature is controlled by “EGO”/”JUMO”GERMAN hydraulic type capillary thermostat from 50°C to 250°C+ 1°C An-L shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Air ventilators are also provided on the sides of the unit. To work on 220/230 volts A.C. INNER CHAMBER SIZE (WxDxH) (a) 300 x 300 x 300 m.m (b) 355 x 355 x 355 m.m. (c) 455 x 455 x 455 m.m. (d) 455 x 455 x 605m.m. (e) 605 x 605 x 605m.m. (f) 605 x 455 x 910m.m. (g) 605 x 605 x 910m.m.

 

Optional Accessories

 

• Air circulation fan,
• Digital temperature indicatio-cum-controller (air circulation fan compulsory)
• PI Digital Temperature Indicator-cum-Controller (Air circulation fan compulsory)

Additional Information:

• Item Code: SS2023
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: India
• Production Capacity: 100
• Delivery Time: 15 days
• Packaging Details: export packing

Tissue Floatation Bath

Specification

 

This double walled unit is most suited for preparing wrinkle free tissue specimens. Inside is made up of aluminum and outside of M.S. Sheet duly painted. Temperature range from ambient to 80°C + 1°c is controlled by “EGO””JUMO”german hydraulic type thermostat. Complete with indicators, cord and plug, to work on 220/230 a.c. Supply.

 

Inside size : 200m.m.(dia) x 70 m.m (depth)

Additional Information:

• Item Code: SS2041
• Production Capacity: 100
• Delivery Time: 30 days

Body in made of one-piece aluminium and is logged with special mineral wool. The panel is provided with on-off switch, energy control knob, pilot lamp etc. Provided with jointless hand knitted heating nets of glass yarn capable of withstanding high temperature upto 400^oC. Single supplied complete with cord & plug to work on 220 V AC 50 Hz single phase. Single circuit system has been adopted.

Technical Specification:

Additional Information:

• Item Code: HM01
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Western Union
• Port of Dispatch: India
• Production Capacity: 100 pc Per month
• Delivery Time: 30 days

Muffle Furnace Rectangular

 

Specification

 

Light weight with ceramic fiber wool insulation (instead of brick insulation). The outer casing is made of double walled thick p.c.r.c. Sheet, duly painted. Heating elements are made of kanthal “a-1” wire and backed by high temperature carpool insulation, which avoids loss of energy. Temperature control unit consists of energy regulator, fitted in front of furnace with two pilot lamps. The apparatus is complete with one pyrometer, thermocouple, silver thermal fuse, main lead with power plug. To work on 220/230 volts ro 220/230 volts a.c. Maximum temp. Is 1000°c and working temp. 900°c for model of higher temperature the maximum temp. Is 1200°c and working temp. 1100°c.

 

Muffle Size (W x H x D) Working 900°C Working 1000°C

 

• 100 x 100 x 225 m.m.
• 125 x 125 x 250 m.m.
• 125 x 125 x 300 m.m.
• 150 x 150 x 300 m.m.
• 200 x 200 x 300 m.m.
• 175 x 175 x 475 m.m.
• 300 x 300 x 300 m.m.

 

Optional Accessories

 

• Digital Temperature Indicator-cum-controller.
• PI Digital Temperature Indicator-cum-Controller

Additional Information:

• Item Code: SS2031
• Production Capacity: 100
• Delivery Time: 10

Technical Description:

• Ceramic heating plates to provide efficient heating.
• Body made of duly powder coated MS sheet.
• Temperature regulation by energy regulator.
• Auto cut off as desired temperature is reached.
• Sturdy MS stand for distillation and combined units.
• Supplied with complete set of accessories and glass parts.

 

Technical Specification:

Additional Information:

• Port of Dispatch: India
• Production Capacity: 500 pc per months
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty card board boxes

Electrical E-8 Student Kymograph with special heavy duty motor, oil lapped gear systems, speeds from 0.12 mm/sec to 640 mm/sec, in 8 steps, jerk free running, instantaneous start & stop clutch. Stainless steel spindle with screw lift 15 x 15cm cylinder with levelling screws, pilot lamp, plug & cord.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100 pcs per month
• Delivery Time: 30 days
• Packaging Details: wooden crate packing

Casted aluminum vessel is electrically operated for getting pyrogen-free distilled water automatically. Wall hanging space saving arrangement is provided. The condenser is seamless. Fitted with automatic ejection device which operates automatically when water vessel gets dried. The baffle cup and condenser are made out of thick stainless steel sheet.

 

Out Put Capacity

• Output approximate: 2/3 litres per hours
• Output approximate: 4/5 litre per hours

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Western Union
• Port of Dispatch: India
• Production Capacity: 500 pc per months
• Delivery Time: 30 days
• Packaging Details: packed in heavy duty wooden boxes

The spectrometer consists of a telescope and a collimator mounted on a stable heavy C. I. base with three levelling screws. The protected 150 mm (6") or 175 mm (7)" scale divided into 0-360 degrees in steps of half degrees can be read from both scales & moves along with the telescope to give its exact position. It gives accuracy of one minute of an arc or 30 seconds of an arc. Telescope is having an achromatic objective of 7" focal length and a Ramsden Eye Piece with a cross line graticule . The collimator is also fitted with 7" objective & adjustable precision vertical slit with jaws of non rusting metal. Both the telescope & collimator are having fine rack & pinion motion. In the centre of the table there is a prism table for clamping of prism or diffraction grating . Packed in a sturdy wooden box with instruction manual & duster.
l Available in Brass and Stainless Steel scale in both the sizes of 15.0 cm (6") and 17.5 cm (7") of protected circle.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: Delhi
• Production Capacity: 100 pcs per month
• Delivery Time: 30 days

For very precise sectioning of tissue upto 1 micron thickness. The feed indicator, located in front of Microtome is operated by the latest "CAM DRIVE SYSTEM" for accurate feed setting from 1-50 microns in steps of 1micron. The interior mechanism rests on a heavy cast iron base and is covered with a full swing protective cover for easier cleaning & lubrication. The salient Features include: independent feed mechanism with automatic safety device, universal knife holder with lateral movements permitting use of the entire Knife edge, Universal vice type object holder for accurate centering of the specimen. Supplied with the following Accessories : Razor 120 mm with back & handle in box :- 1 No., Oil Can & Dust Cover :- 1 No. each, Honing stone in Box :- 1No., Object holder (set of 3) :- 1Set.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 100 pcs per month
• Delivery Time: 30 days
• Packaging Details: export packing

Vacuum Oven

 

Specification

 

These are double walled units with outer made of M.S. sheet duly enamel painted and inner made up of heavy gauge S.S. sheet. Gap between the two walls is duly fitted with high grade glass wool to avoid thermal loss. Temperature range from 50°C to 150°C is controlled by “EGO/JUMO GERMAN hydraulic type thermostat with an accuracy of + 1°C . It is capable of withstanding a high vacuum. Provided with vacuum gauge, see through transparent window of toughened glass and one shelf. To work on 220/230 volts A.C supply.

 

Inside Size (Dia x Depth) Without Vacuum With Vacuum Pump

• Round: 200 x 200 mm.
• Round: 250 x 250 mm.
• Round: 250 x 300 mm.
• Round: 300 x 300 mm.
• Rectangular : 300 x 300 x 300 mm. (W x D x H)

 

Optional Accessories

 

• Digital Temperature Indicator-cum-controller
• PI Digital Temperature Indicator-cum-controller

Additional Information:

• Item Code: SS2027
• Pay Mode Terms: T/T (Bank Transfer),D/P
• Port of Dispatch: india
• Production Capacity: 100
• Delivery Time: 15 days
• Packaging Details: export packing

Research Medical Microscope

 

• Frame- All aluminum pressure diecasted body. 
• Paint - P.U. coating in light cream shade.
  Nose piece- Reverse type ultra Quadruple ball bearing nosepiece. 
• Binocular head- 360* rotate able and 30* inclined head with all anti-fungus coated prisms.
• Focusing system-fine Co-axial focusing system with three planetary gears assb. With slide protection lock.
• Mechanical stage- Mechanical stage for smooth functioning.
• Condenser - Condenser Bright field sub stage condenser having 1.2 N.A.
• Objectives- 10x, 40x, and 100x and a paired set of 10x wide field eyepieces.
• Eye piece-  WF-10X.

Additional Information:

• Production Capacity: 500 per per month
• Delivery Time: 15 days
• Packaging Details: Standard Packing