WATER BATH

THERMOSTATIC WATER BATH: MODEL EHT – 23 (C)

It is double walled construction, inside made of Stainless Steel heavily polished: Outside made of mild steel with 1” gap filled with insulation, painted attractively. The polished cover with concentric rings and lids are also provided. Electrically heated with thermostatic control by hydraulic control by Hydraulic Capillary Type Thermostat. Temp. range ambient to 100°C accuracy ± 1°C or better. Working on 230V AC Single phase.

WORKING SIZE:
16” x 12” x 4” 12 Holes Rating 1.5 Kw
14” x 10” x 4”   6 Holes Rating 1.0 Kw

Outer body made of ACRYLIC SHEET, available in attractive colour

UNIVERSAL WATER BATH: MODEL EHT – 23 (E)

It is full of Stainless Steel polished Temperature range 5°C above ambient to boiling point of water having accuracy ± 1°C or better.

WORKING SIZE:
(a) 12” L x 9” W x 7” Ht. Rating 750 Watts
(b) 18” L x 12” W x 7” Ht. Rating 1500 Watts

Above can be available with Drop on lid with holes & concentric rings Pyramid lid, Khan Rack, Wasserman Rack & Agglutination Rack as per requirements.

DOUBLE WALLED INSIDE S. S. & OUTER ACRYLIC
SHEET MODEL IS ALSO AVAILABLE

Double walled, inner made of Stainless Steel polished & outer made of mild steel duly painted. Temperature range ambient to 90°C controlled by hydraulic capillary type thermostatic having range 30°C - 100 °C. Available for Dye-Pot capacity 250 ml or 500 ml for keeping 6 or 12 dye-pot. Specially made Stainless Steel Dye-Pots are also available.

WATER BATH ROUND BOTTOM FLASK: MODEL EHT – 23 (I)

Full made of Stainless Steel from 2 Ltr. Capacity to 20 Ltr. OR 50 Ltr. Capacity with/without Thermostatic Control Models available.

CONSTANT-TEMPRATURE CIRCULATING WATER BATH : MODEL EHT-24

CONSTRUCTION: Inside reservoir made of Stainless Steel & outer M.S. painted. In between wall is filled with insulation. All controls are mounted on one side of the bathe, leaving maximum space free from obstruction. The short heating up time and the high temperature stability permit permit to use the unit for a wide range of applications.

CIRCULATION & CONTROLS: A circulatory FHP MOTOR WITH STIRRER is mounted on a top and fitted on one side of the bath.. Temperature range ambient to 100°C provides most sensitive control by Digital Display Controller with sensitivity ± 0.5°C or better. Heating is by permanent heater and one booster heater. The heater called BOOSTER HEATER has been designed for initial warming up to accelerate the growth of the temperature. Control gears consist of switches for motor and heaters, main lamp, Pilot lamp, Solid State Electronic Temperature Indicating Controller Digital. Working on 230 Volts A/c. Single

TEMPRATURE RANGE: 0.5°C above ambient to 90°C/160°C with ± 0.5°C accuracy.

Size: 15” L x 12” W x 10” Ht. Rating: 2 or 3 KW
DIFFERENT SIZES AVAILABLE ON REQUEST